View Single Post
  #4 (permalink)  
Old 08-25-2011, 08:29 AM
denman denman is offline
Senior Expert
APP Volunteer
 
Join Date: Feb 2008
Posts: 19,632
denman is a splendid one to behold
Default

Is this because the wire now going to Cold side (was from the hot solenoid originally) is sending message (voltage) for cold side to open which it does so you get cold water, yet the valve is not opening when message (voltage) is coming to the input on the Hot side (from wires originally working when connected to cold side)?
Yes.
You know that the cold valve is getting voltage as it does work. Now you have that voltage on the hot valve so if the valve does not open you know that the valve is toast.

Be sure to use a warm or cold setting.
__________________
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17