View Single Post
  #5 (permalink)  
Old 12-05-2008, 12:05 PM
Matti Matti is offline
Junior Member
 
Join Date: Dec 2008
Posts: 3
Matti is on a distinguished road
Default

Used a Continuity Tester:
- fuse indicated continuity both manual inspection and via tester
- black microswitch showed continuity red-black with lid down, and none when lid was open
- white microswitch showed continuity yellow-red, but not yellow-white and not white-red. Lid position made no difference.

Please do your magic and translate the above. I don't know if all terminal points tested should have shown continuity, or these results show the white microswitch is bad?

What next? (gonna run out of cean clothes real soon :-)

Thanx a 'load'.

I realized that I posted this thread in the General Talk, not in the Washer Repair. If it should be relocated, please free to do so. Sorry about that.

Last edited by Matti : 12-07-2008 at 04:57 PM.
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17