View Single Post
  #5 (permalink)  
Old 06-16-2011, 08:20 PM
Bill L Bill L is offline
Junior Member
 
Join Date: Jun 2011
Posts: 2
Bill L is on a distinguished road
Default Dispensing Cold Water is very Slow

Here's my Problem

1. Starting a new load - Temperature is set for Hot/Cold
2. The washing machine will load the hot water just fine and washing begins.
3. After the Hot water has emptied for the wash, the cold water will start to come out. Here's the problem, the cold water is being dispensed as a trickle and takes a very long time to fill the tub.

If the temp is set for cold/cold, the cold water is dispensed as a trickle for both the wash and rinse cycle.

Thanks
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17