Thread: Dishwasheer
View Single Post
  #2 (permalink)  
Old 05-26-2011, 01:18 PM
Joe / APP Team's Avatar
Joe / APP Team Joe / APP Team is offline
Senior Expert
 
Join Date: Jul 2010
Posts: 5,017
Joe / APP Team is on a distinguished road
Default

Quote:
Originally Posted by GRAMCRACKER View Post
I Would Like Instructions On Removing The Control Panel On This Model To Repair The Latch Assembly
Gramcracker,

You don't have to remove the control panel, you remove the plastic inner door liner.
Here are the instructions from the service manual,

Inner Door Panel
Removal of the Inner Door Panel will allow access to the Microprocessor Board, Door Switches, Detergent / Rinse Aid Dispenser, and Vent Assembly.
Removal
1. Disconnect power to the machine.
2. Open the Dishwasher door.
3. Remove the 11 Torx™ screws along the sides and
top of the Inner Door Panel.
4. Separate the Inner Door Panel from the Outer Door.
5. Disconnect wires from the Vent and Dispenser Wax
Motors before pulling the Inner Door Panel away
from the Dishwasher.

1. Disconnect power to the machine.
2. Remove the Inner Door Panel. (See paragraph Inner
Door Panel removal).
3. Lift Door Latch Assembly out.
Switch Removal
1. Disconnect power to the machine.
2. Remove the Inner Door Panel. (See paragraph Inner
Door Panel removal).
3. Remove Door Latch and Switch Holder Assembly.
4. Depress locking tabs and lift switch from holder.

Good Luck,

__________________
Thanks for allowing AppliancePartsPros.com to assist you,

Joe M. APP TEAM



Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here.
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17