Thread: GE dishwasher
View Single Post
  #6 (permalink)  
Old 05-02-2011, 12:19 PM
Joe / APP Team's Avatar
Joe / APP Team Joe / APP Team is offline
Senior Expert
Join Date: Jul 2010
Posts: 5,216
Joe / APP Team is on a distinguished road

Originally Posted by pwalsh View Post
Hello Joe, Since I last wrote, the noise is getting more frequent. How do I tell between a motor or water pump that is making the noise. Since cleaning the debris out of the screen the screeching is gone but a now its more of a grinding. What is your thoughts?

My guess,

There's still something in the assembly, most likely on the other side of the screen, in the impeller assembly,

Part number: AP631386

Part number: AP631386

You'll need to separate the motor from the pump housing and check for debris and damage to the impeller and associated parts.

You'll need to remove the hanger, holding the motor end up and the motor wire harness, the drain hoseand the drain solenoid linkage. loosen the 2 hose clamps holding the pump assembly to the sump. and the upper clamp attached to the spray arm assembly and carefully slide the assembly out, so you can access and remove the impeller assembly parts, and check the debris.

Good Luck,
Thanks for allowing to assist you,


Find Appliance Parts at - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here.
Reply With Quote

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17