View Single Post
  #9 (permalink)  
Old 04-20-2011, 03:13 PM
jeffepops jeffepops is offline
Junior Member
Join Date: Feb 2011
Posts: 5
jeffepops is on a distinguished road

Yes, I ran the normal wash cycle. I don't have a multimeter, but I did clip a simple 120/240v circuit tester to the yellow/black and blue leads. It did not light up at all over the first 5 minutes of the normal cycle, and when plugged into the switch, the switch did not open. I had the panel off of the door, so was able to observe that nothing moved anywhere. I ran it several times to be certain. Can't think of what else I should have done. Thanks!
Reply With Quote

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17