View Single Post
  #2 (permalink)  
Old 04-04-2011, 12:32 PM
Joe / APP Team's Avatar
Joe / APP Team Joe / APP Team is offline
Senior Expert
 
Join Date: Jul 2010
Posts: 5,222
Joe / APP Team is on a distinguished road
Default

Quote:
Originally Posted by davecspencer View Post
DAVE: HI I just ordered and rec'd today a motor and a coupling for a Kitchen Aid Blender the new motor has a different mount that holds some kind of a sensor next to the motor armature ...it is a 3 wire 4 " long with white connectors on each end ...one end plugs into the circuit board ...the othere goes into holder ? ? ? I can't find wire

Dave,

On the new motor, you recieved,

Part number: AP4325805

Part number: AP4325805


The holder for the overload protector (3 wire harness), is located on the bottom of the motor, and you "snap" the sensor end of the harness into the holder on the bottom, and then the other end onto the connector on the control board.

I think you'll be alright from here on out.

Good Luck,

__________________
Thanks for allowing AppliancePartsPros.com to assist you,

Joe M. APP TEAM



Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here.

Last edited by Joe / APP Team : 04-04-2011 at 12:55 PM. Reason: misspelled word
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17