View Single Post
  #2 (permalink)  
Old 03-25-2011, 12:28 PM
Jeff / APP Team's Avatar
Jeff / APP Team Jeff / APP Team is offline
Senior Expert
Join Date: Feb 2011
Posts: 816
Jeff / APP Team is on a distinguished road

Hello EdP. You can test the compressor windings and see if it is good. The run windings will read 1-5 ohms, and the start will read 3-11 ohms. Also check from the terminals to ground and make sure the compressor is not grounding out. If the compressor checks good, then the overload should fix your problem. Hope this helps.
Part number: AP3873993

Part number: AP3873993

Unit replacement parts for WHIRLPOOL KSRS25IHSS02 |
Thanks for allowing to assist you,

Jeff K. / APP TEAM

Find Appliance Parts at - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here.

Last edited by Jeff / APP Team : 05-23-2011 at 01:41 PM.
Reply With Quote

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17