Extended drying time
Model Number: GEQ9800PW1 Brand:
5 - 10 years
Dryer is not drying properly. Takes about 3 cycles to fully dry clothes. There is some heat however. So far I have checked the heating element itself for any breaks and with meter. Checks out fine. I then scoured online for help and concluded the most common culprits are the thermal cutoff switch, high limit thermostat but these also checked out fine as well. Then I suspected I had found the problem in the internal bias thermostat because I read somewhere that 2 of the leads on it should read 0 ohms and it did and the other set should read 7 ohms and it didn't. Excited with the anticipation of a fix I ordered the part from AP PROS only to be disappointed as this didn't fix the problem. I at my wits end with this but it's not in me to simply give up, after all it's only 6 yrs. old and a higher end unit with the bells & whistles. Any advice on this would be greatly appreciated.
Not ready for the curb