View Single Post
  #1 (permalink)  
Old 02-26-2011, 10:52 PM
ldpfeifer ldpfeifer is offline
Junior Member
 
Join Date: Feb 2011
Posts: 1
ldpfeifer is on a distinguished road
Default Trane XE 90 pressure switch
Brand: -brand-   Age: 5 - 10 years   

Appliance Parts from AppliancePartPros.com


Helping a friend that bought a house with this furnace. It was not running right as the red wire for the t stat was not hooked up. I opened the unit as I was getting 3 red lights for the pressure switch being stuck open. I held it closed with my knife and it fired off, then 2 lights for being stuck closed. I removed the P switch and shook it a bit and put it back on. There is a connection for the clear air hose in the back and in the front of the pressure switch. The back hose was installed but the front hose was off. I got the unit to run with this hose off but am not sure if it is suppose to be off or on. When installed the furnace fires off then quits and give me the 3 lights. Off, it runs fine. Any one know if this is to be on or off? If its suppose to be on, the switch is most likely bad.
Thanks in advance,
Lyle

Reply With Quote
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17