Element replaced
I changed the top element, and my problem went away (keeping my fingers crossed). There are 6 phillips head screw holding the element shield to the top of the oven, once this is removed the element (still attached to the shield) will come off and the 2 connectors will pull through the insulation from the top/back part of the oven, now you can disconnect the top element and replace. This is the second element I've changed the first one actually burnt out completely.
I went this route as the first try cheapest fix, the other fix is the control board which runs $130+. the element was 40$. So far the oven has not acted up since the change. Good Luck, I hope this helps.
|