View Single Post
  #9 (permalink)  
Old 10-08-2007, 12:03 PM
Leonard Leonard is offline
Junior Member
 
Join Date: Oct 2007
Posts: 5
Leonard is on a distinguished road
Default

Quote:
Originally Posted by skysentinel View Post
I would have to guess that the replacement baffles are either a design improvement, or they are the type now being used in the new Duet washers. If you really want to find out if this is the case, then you might want to stop by a local dealer and take an up-close look at the current models.
Yeah, that is probably the case. Did yours look like the ones pictured on the site (tall one end, thin taper on the other) or more like mine (rectangular with a taller section ~30% of the way in)?
Quote:
By the way, I looked at the baffles in my dryer, and they are straight, much taller, and much thinner than the washer baffles.
Mine too, which definitely confused me when googling around for the Whirlpool part number and having them described as dryer baffles.

Thanks Lynn! I will go ahead and order mine so I can do some laundry.
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17