[libertyappl]

Here are a few tips from the service manual

No oven operation in bake or
broil.
No voltage to control. ................................
No voltage from control .............................
Loose wire connection or broken wire.......

•

Check for 120 VAC at control. If no
voltage check power source.

•

Check 120 VAC to ignitor, if no
voltage, replace control.

•

Verify all connections are clean and
tight, replace broken wire.

No bake element operation Open bake element...................................
Loose wire connection or broken wire.......
Open bake relay........................................

•

Check element for continuity,
replace if failed.

•

Verify all connections are clean and
tight, replace broken wire.

• Verify 240 VAC at bake element.

No broil element operation Open broil element ..................................
Loose wire connection or broken wire.....
Open broil relay .......................................

•

Check element for continuity, replace
if failed.

•

Verify all connections are clean and
tight, replace broken wire.

• Verify 240 VAC at broil element.

See if this helps any.
nat