Rick,
Luckily I am a pack-rat with emails so I was able to piece together what I did...
I started with ordering these parts:
Part Number Description Qty Price
---------------------------------------------------------------------
AP3988821 (Y312959) BELT, TUMBLER & MOTOR 1 $19.31
AP3992607 (Y312527) WASHER, IDLER SHAFT ( 2 $3.31
AP3970789 (Y303705) PULLEY, IDLER 1 $10.34
AP2996314 (354987) Ring - e 1 $4.36
But the noise must have persisted because I ordered these a couple weeks later:
AP204721 (12001541) Drum roller 1 $18.01
AP3038076 (9703438) Retaining clip 1 $5.35
I vaguely remember that the black part of the drum roller separated from the "rim" of the roller and that was the cause of the noise. I would recommend doing both the drum roller & belt. I get the little clips because inevitably I might damage one & it is cheap enough.
And then a year later a totally different problem started and I replaced:
AP2954258 (312967) Clamp 1 $3.78
AP4294048 (Y303836) BLOWER WHEEL ASSEMBLY 1 $21.46
AP3038076 (9703438) Retaining clip 1 $5.35
This was obvious because the center plastic sleeve started to deteriorate and the blades were scrapping on the inside of the Blower Housing.
Hope this helps & Good Luck,
Sal
|