View Single Post
  #3 (permalink)  
Old 11-19-2010, 10:39 AM
raymac1215 raymac1215 is offline
Junior Member
 
Join Date: Nov 2010
Posts: 5
raymac1215 is on a distinguished road
Default connectors

I did try that, but they are connected so tight I was afraid to break the connector. I'll try it again. There appears to be a hole in the male connecter that holds it in place in the connector. I was able to get one side to come out which is how I seen the hole in the metal strip, but the other side is really stuck. I'll try again. Thanks for the advice and I appreciate your help. Just wanted to be sure there was no release pressure point I was missing.

Last edited by raymac1215 : 11-19-2010 at 11:26 AM.
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17