Parents elec dryer (6 yrs old) has no lights on front - technician unplugged/plugged unit, lights came on for awhile, then flashed and then nothing. Said Touchpad assy needs replacement. I removed and tested touchpad function per "Tech Sheet". Had 5.6 m ohms on all buttons pressed.
Could this be a overheat related failure? Could it be Electronic Control board overheating.
I found this thread and would rather not buy both parts if it is more likely just one part like the person on the following thread went through.
Kenmore Elite (110.62042100) Dead after power hit - Appliance Blog Repair Forums