View Single Post
  #5 (permalink)  
Old 08-27-2010, 09:04 AM
MarkU MarkU is offline
Junior Member
Join Date: Aug 2010
Posts: 1
MarkU is on a distinguished road
Question GE Profile downdraft system on-off switch problem

My GE Profile downdraft system has a problem that seems related to the other posts here. The on-off switch (it's the 30" model so the switch is incorporated into the fan housing) works to make the system go up and it will turn on so the fan works. I can turn the fan off (using the separate switch for that), but the on-off switch in the housing doesn't work to allow the system to lower itself. I know the electricity to the device is working (the fan works) but maybe there is a problem in the switch itself. Sometimes it makes a noise, when I push the button, but I can't find out what to do to get it to lower itself.

I did not at any time feed it ************, so that's not the problem.

Any advice is appreciated. Perhaps it's the switch, itself (although it seems to work to make the device go erect).

Mark Uhlfelder
Reply With Quote

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17