Originally Posted by staceymots
We had someone come and replace a part with part number MFS-F13DL-SO and that is not the problem either, he cleaned everything also, what else could it be. Even after replacing the part, the dryer still shuts off after 15 minutes and it cost us $185...(which i think is a rip-off)
I don't see what a control board has to do with your complaint ?
I may be wrong about the motor, but we know that the control didn't solve the problem.
Try this first,
You may have a build up on the sensor bar in the drum back wall, or the filter housing(2 silver metal strips).
Get some alcohol on a rag, and clean those metal strips really good and try it with a load.
I hope this is it