[abadfish66]

1st, you need to remove the vent grille above the door, 2 screws in front as your looking at it, next remove the bottom access panel, under the micro, take all screws out. now the bottom door hinge is attached with two 5/16 screws, remove those. At the top door hinge there may or may not be a phillips screw at the frame where the door hinge is, remove it if it's there, now look inside the micro where the door hinge goes into the cavity, and there are two 5/16 screws holding the hinge in place, remove those and remove the door. I find it easier to use a socket and ratchet to get the top hinge screws out....hope this helps