[Wesley]

I recently moved and had to hook up a 220 outlet for my dryer plugged it in and found it did not heat. I went down and reset the 30amp double pull breaker and still no luck. I tested the outlet with a meter and it read 120-124 on each hot wire and at the same at the terminal block. I am no electrical genius abd am not very confident on how to properly test omhs. I checked the power cord and showed 0 so that means that it is closed and good. NOt sure if I am saying it right. I also replaced the heating element. Still no heat. I am looking for advice on how to properly check the thermostats and fuse for continuty.