[AdamH]

My Kenmore is around 2 years old and recently it has just stopped working mid cycle and the keypad dies out.

It seems to power back on indescriminately and when it restarts (resuming where it left off) it can stay on for <1 minute or run for 10.

I looked at the circuit diagram and ran the diagnostic but it dies in the middle of that too.

I called an appliance repair guy who, as a result of being stuck in traffic, tried to help me self diagnose it- he seemed to think the computer/circuits were all fine and that it sounded like a fuse was tripping (or a heat sensor?).

However, I can find nothing labeled fuse on the schematic. I'm betting he's right as now that I think about it, it seems to power back on after it has cooled off.

All connections are snug on the board as are the connections from the dishwasher to the power source. There is no corrosion on the board.

I'm trying to discern my model number but the front of the manual lists the following: 665.1602, 665.1702, 665.1603, 665.1703, 665.1622...

I'm hoping it's something simple. Any ideas? Thanks in advance.