View Single Post
  #2 (permalink)  
Old 06-05-2008, 01:40 PM
abadfish66's Avatar
abadfish66 abadfish66 is offline
Senior Expert
APP Volunteer
 
Join Date: May 2008
Posts: 1,611
abadfish66 is a glorious beacon of light
Default

If my math is correct, the element should read 18.75 ohms or close to it. Take a continuity check of the Thermal limiter, that is your thermal fuse, to determine if open or closed. if thermal limiter checks out ok, look at the heater relay on the board, look for loose solder connection, bang the relay with a screwdriver, it may be stuck open.
__________________


Last edited by abadfish66 : 06-05-2008 at 01:44 PM.
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17