View Single Post
  #3 (permalink)  
Old 05-22-2010, 11:41 PM
miamichrismeltdown miamichrismeltdown is offline
Junior Member
 
Join Date: May 2010
Posts: 3
miamichrismeltdown is on a distinguished road
Default

I am disappointed that none of the documentation identifies what "L-"E error code is. I did find it elsewhere by describing it as an upside down F and a normal E. The other location lead me to believe it had something to do with the thermistor (heat unit) at the bottom of the tub. I inspected it and found that one of the wires I had "spliced" had broken off and was now providing an open signal instead of a closed loop. The wire color on the broken wire was white and there was also an orange wire as well. I had replaced the thermistor recently and used the provided wire splice connectors, but the wire splice mechanism had apparantly cut deep into the wire causing it to break after some time (likely due to vibration while operating the washer).
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17