Thread: something in lint trap
View Single Post
  #4 (permalink)  
Old 05-08-2008, 06:21 PM
SublimeMasterJW SublimeMasterJW is offline
Senior Expert
APP Volunteer
  
Join Date: May 2008
Location: Mobile,Al
Posts: 265
SublimeMasterJW is on a distinguished road
Default Spring clips hold the top down
Go along the outer edge between the front and the top and use a putty knife. Press against the clips located 2 inchs from either side of the dryer. while lifting upwards on the top. It should just release.top removal.jpg
Reply With Quote