View Single Post
  #3 (permalink)  
Old 09-03-2007, 06:47 PM
Admin / APP Team's Avatar
Admin / APP Team Admin / APP Team is offline
APP Team
Join Date: Jul 2007
Location: Encino, California
Posts: 799
Admin / APP Team has disabled reputation

Oven igniter has two wires. One of the wires comes from the oven control and the other goes to the valve. Igniter wires either connect via ceramic wire nuts or a plastic plug. Since this is a Modern Maid oven, chances are wire nuts are being used. New igniters usually come with a pair of high temperature resistant wire nuts. Replace the igniter using the wire nuts provided.

If you don't see any connection in the igniter wires (not very likely, but possible), you can simply cut the wires about 6 inches from the igniter and re-connect the new igniter using wire nuts.

Hope this helps.
Reply With Quote

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17