[Cody G]

Hello, I was wondering if the advice from Gene solved your problem, Mr. G?
I was also advised to check for damage or clogs on oven pilot, as well as look for reset switches -- there seem to be none, although I am waiting for delivery of the instruction manual I found at TOAC online. I also attempted adjusting the screw on top of the oven pilot assembly and waiting two minutes while applying the camping lighter to the pilot continuously. I don't even smell gas, and the wires must be good because I hear a strong "click" noise when switching the timer to MANUAL. But we can manually light the oven regardless of the switch position. Our problem began after I repaired and replaced pilot tubing on top burners. But what doesn't make sense is that BOTH OVEN AND BROILER pilots won't light now. Any suggestions out there from anybody. Please help! Thank you! Cody. (Here is original question posted also on this forum): We have a Gaffers and Sattler vintage gas stove model w5494g (ca. 1956?) in great condition. The oven and broiler were working beautifully, but I had to replace the pilot tubing and clean up the pilots for the top burners and griddle, now they are all working and burner pilots stay on fine. But NOW the pilots for the OVEN and BROILER do not light at all. We can manually light the oven and broiler by turning the controls, gas is being sent to the larger pilot when clock is on MANUAL mode. The strange thing is, I did nothing to change anything to do with the oven or broiler -- is there a reset button on the safety valve? If it has to do with the thermocoupler, why was it working just last week, but not now? Is heat from the burner pilots affecting the thermocoupler? What has changed? Thank you for your help, we love our stove, but we want it to be safe and useable!
Cody and Florence