Thread: Drum Access
View Single Post
  #3 (permalink)  
Old 04-10-2008, 01:51 PM
vns vns is offline
Junior Member
 
Join Date: Oct 2007
Posts: 6
vns is on a distinguished road
Default

Thanks Glen, I tried what you said, the drum turned free counter clockwise, but not clockwise. The motor would "buzz" as if under load when I turned to Start. Drum didn't catch and start while turning counter clokwise. Motor stopped buzzing, (I only kept start switch on 3-4 seconds) but would buzz again after trying a few more times. I removed the small panel in the back and could see the motor and idler pully, belt is intact. I guess it may be the motor or bearings? Is the top of this model supposed to open like most others? I didn't want to force it and I don't see any screw holding it down. Thanks.
Reply With Quote