View Single Post
  #2 (permalink)  
Old 02-22-2010, 07:05 PM
magician59 magician59 is offline
Senior Expert
APP Volunteer
Join Date: Aug 2007
Location: Southeastern Texas
Posts: 3,273
magician59 will become famous soon enough

This can all be done from the front and back of the machine: Open the door and remove the screws from the hinges and the plates across from the hinges. The door can be lifted out of place and set aside. The front panel can now be removed by unclipping at the top corners, and rocked forward, and off the bottom brackets. The access to the belt, and the motor retaining bolt is through the small panel in the rear of the machine.
Reply With Quote

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17