[mark mazurkiewicz]

Whirlpool gas dryer LGQ9557KQ0 heats on start up but flame does not come back on after.

I cleared the lint housing, checked the orifice . . . appeared fine.

I was checking the parts illustration and saw the internal thermostat bias AP3045874, the T-stat-hi-limit AP3084674, and I read the threads on checking the thermal fuse AP3132867. I'm trying to diagnose or troubleshoot. Would the thermal fuse do that and what do the other 2 items affect?

I just measured continuity across my thermal fuse . . . eliminate that as a possiblity.

Thanks,

Mark