After our water hose broke and we frantically tried to shut down the washer, it refuses to spin. The water will drain, but no fast spin. If you place the dial near the end of the cycle it will just hum... is that the pump running? or the motor trying to go... I have the entire machine apart, trans and motor are assembled together on the floor so I can test things... the motor will work on low speed and it agitates slowly.. very slowly... but it will not spin... does the switch on the motor control the speeds, is the motor itself bad? I separated the motor and trans and the coupler is fine nubs on both sides... i placed it back together and im ready to test things out.. do I need to get an OHM meter? or is this an easy fix? switch, motor, help help help...
