Thread: f10 error code
View Single Post
  #4 (permalink)  
Old 01-16-2008, 12:00 PM
Gene's Avatar
Gene Gene is offline
Senior Expert
APP Volunteer
 
Join Date: Jul 2007
Location: Orange County, California
Posts: 27,171
Gene has a brilliant futureGene has a brilliant future
Default

Hi Lindi,

The "F10" error code caused by the runaway temperature.

The first thing I would check is the resistance across the oven temperature probe (aka oven temperature sensor) terminals at the EOC (electronic oven control) plug.

It suppose to be about 1100 Ohms at the room temperature.

If the resistance at the EOC plug is wrong, then measure the oven temperature probe resistance at the probe plug.

If it's wrong - replace the oven temperature probe. It's better to hardwire it, using a high temperature ceramic wire nuts.

If the readings at the EOC and at the oven temperature probe plug are different - check the wire harness between the oven temperature probe and the EOC.

If there is nothing wrong with the oven temperature probe resistance - replace the EOC.

- The part number for the oven temperature probe is AP3704441

- The part number for the EOC is AP3776874

- The part number for the EOC overlay is AP3778486

Good luck.
Gene.
__________________
Appliance Repair Expert in Orange County, California.

Order Appliance Parts with 365-Day Hassle Free Return Policy - AppliancePartsPros.com
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17