What you could try, providing you still have some length on the 1/4" water line is this...Make sure the ice maker fill tube is not frozen (remove if necessary to check) pulls out through back of fridge. Cut an inch off the plastic water line that pushes into the fill tube. Go to local hardware store or Home Depot. Buy a 1/4" copper tube compression fitting that has a plastic water line insert in the package. It looks like a small copper tube with a flared end that gets inserted into the end of the plastic tube to stop it from getting squashed or distorted when tightening up the clamp and install it back into the fill tube and tighten clamp.
Good Luck.
|