View Single Post
  #3 (permalink)  
Old 07-20-2009, 01:57 PM
ant00r1 ant00r1 is offline
Junior Member
 
Join Date: Jul 2009
Posts: 20
ant00r1 is on a distinguished road
Unhappy still dead

richappy , thanks for the quick reply! i finally got around to checking the voltages & as far as i can tell there is no power to the board. i probed every contact on all the plugs at the board & nothing on all of them. (i put ground probe to the metal backing on fridge.) there are plugs for the J1, J2, J3 & J7 points on the board only. is there a junction box or something that directs power to different parts of the unit? i also checked the J2 pin 1 to pin 3 check with 0 voltage also. any other suggestions? thanks again, anthony
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17