[eappel]

One of the Door Cables broke and now the door just flops down. I have removed the lower panel and looked inside. One of the Springs (part# 44) was still hooked onto the broken, flat end of the Cable (Part #8) but neither Spring was attached to anything else. I presume that when the Cable broke it released the Springs and the other Cable off the side of the door.

My question is this: If I order a new set of cables does one end of each new Cable attach to both Springs and then does it (loop) around the white plastic roller before attaching to the lower end of the door? Or does it just (go around) the white plastic roller? Then repeat the same connection for the other end of the Springs?

Or are the Springs attached independently of eachother to the Frame somewhere?
Should I also replace both Springs as well at this time .