View Single Post
  #2 (permalink)  
Old 06-23-2009, 02:10 PM
Dan O. Dan O. is offline
Senior Expert
APP Volunteer
 
Join Date: May 2009
Posts: 647
Dan O. is on a distinguished road
Cool

Quote:
The right rear element does not does not heat. I do not know what the trouble is. Element or the control unit.
It could be the element switch, the element itself, the limiter on the element or the wiring between the element and the switch.

Quote:
If given instruction I feel I can repair this myself.
The element should be able to be tested for continuity (see the following link) to see if it was good or not as could the element limiter and wiring if you can follow a wiring diagram.

LINK > How do I test for continuity?

Getting to those components is something in itself, I could not tell you how to go about it. You can however see exploded parts views for your model at the following link which might give you an idea how your range is constructed.

LINK > Exploded Parts Diagrams

JFYI

Dan O.
www.Appliance411.com
The Appliance Information Site

=D~~~~~~
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17